Not sure how many tile leveling clips per m² you need before you start your tiling job? You’re not alone — it’s one of the most common questions we get from both first-time DIYers and experienced tilers across Ireland. Order too few and you’re stuck mid-job. Order too many and you’ve wasted money. This guide gives you a clear, practical answer — so you can plan your project with confidence.
Why Getting the Clip Count Right Actually Matters
Running out of tile leveling clips halfway through a bathroom floor or a large kitchen job is more than just an inconvenience. It means stopping work, waiting for a delivery, and risking inconsistencies in your tile adhesive setting time.
Getting the right quantity upfront means a smoother job, a flatter finish, and fewer headaches. Whether you’re laying 60×60 cm porcelain tiles in a Dublin apartment or tackling a large commercial floor in Cork, planning your clip count is a non-negotiable first step.
Tile Leveling Clips Per m² — The Quick Answer
There’s no single magic number — it depends on your tile size. Larger tiles need fewer clips per m², while smaller tiles need more. Below is a practical reference guide to get you started:
- 30×30 cm tiles — approximately 20 clips per m²
- 45×45 cm tiles — approximately 14 clips per m²
- 60×60 cm tiles — approximately 10 clips per m²
- 60×120 cm tiles — approximately 8 clips per m²
- 90×90 cm tiles — approximately 6 clips per m²
These are solid estimates for standard floor and wall layouts. For a precise calculation based on your exact tile dimensions and floor area, use the free Fixplus® Clips Calculator — just enter your m², tile length, and tile width, and it does the maths for you instantly.
How to Calculate Your Clips — Step by Step
If you prefer to work it out manually, here’s a simple process any beginner can follow:
- Measure your area — calculate the total m² you’re tiling (length × width of the room).
- Add 10% for waste — always allow extra for cuts, corners, and any broken clips.
- Find your clip rate — use the tile size reference above or the Clips Calculator.
- Multiply — total m² (including waste) × clips per m² = your order quantity.
- Round up to the nearest bag size — clips come in bags of 100 or 250, so always round up rather than short yourself.
Example: You’re tiling a 15 m² bathroom floor with 60×60 cm porcelain tiles. That’s 15 m² + 10% waste = 16.5 m². At 10 clips per m², you need roughly 165 clips — so two bags of 100 clips (200 pcs) is the right call.
Wedge Type vs Twist Type — Does It Change the Count?
Good news: the clip count per m² stays the same regardless of which Fixplus® leveling system you use. The difference is in how the clips work, not how many you place.
- Wedge Type — uses spacer clips + wedges + a plier. Best for tile thickness 3–15 mm. Joint widths from 1 mm to 4 mm. Wedges are reusable. See the full Wedge Type Application Guide.
- Twist Type — uses screw clips + caps, no plier needed. Suits tile thickness 3–17 mm. Joint widths of 1.5 mm and 2 mm. Caps are reusable. See the Twist Type Application Guide.
Only the clips themselves are single-use — they snap off cleanly at the grout joint once the tile adhesive has cured. Wedges and caps can be collected and reused on your next job, which makes both systems genuinely cost-effective over time.
New to Tile Leveling? Start with a Starter Kit
If this is your first time using a tile leveling system, the smartest move is to start with a Fixplus® Starter Kit. Each kit comes with everything you need in one box — clips, wedges or caps, and a plier (for Wedge Type). The BASIC 100-piece Wedge Type Starter Kit covers approximately 10 m² when working with 60×60 cm tiles and starts from just €41.85.
It’s the most practical way to try the system before committing to bulk quantities — and if you’re taking on a bigger job, the 250-piece kits offer better value per clip. Not sure which kit suits your project? Watch the Fixplus® Video Instructions to see both systems in action before you order.
Tips to Avoid Running Short on the Job
- Always add 10–15% extra — account for cuts, L-shaped rooms, and the odd clip that gets damaged.
- Check your grout joint width — Fixplus® clips come in 1 mm, 1.5 mm, 2 mm, and 3 mm joint widths. Make sure you order the right size for your chosen grout joint.
- Large format tiles need more clips per tile — even if the per-m² count is lower, big tiles (e.g. 90×90 cm) need clips on all four edges to prevent lippage in the centre.
- Order before 12:00 PM — Fixplus® ships via DPD with next-day delivery across Ireland on in-stock items. Orders over €99 qualify for free shipping.
- Use the calculator every time — even experienced tilers use the Clips Calculator as a quick double-check before placing an order.
Ready to Order?
Now that you know your clip count, head over to the Fixplus® shop and pick up the right quantity for your job. From beginner starter kits to bulk trade orders, everything ships fast from our warehouse in Wicklow — straight to your door, anywhere in Ireland. Need help choosing? Contact the team at Fixplus® Customer Services — we’re available 24/7.
Frequently Asked Questions
How many tile leveling clips do I need per m²?
It depends on your tile size. As a general guide: 30×30 cm tiles need around 20 clips per m², 60×60 cm tiles need around 10 clips per m², and larger formats like 60×120 cm need approximately 8 clips per m². Use the free Fixplus® Clips Calculator for an exact figure based on your specific tile dimensions and floor area.
Can I reuse Fixplus® clips after tiling?
No — the clips are single-use only. They snap off cleanly at the base once the tile adhesive has cured, leaving no residue in the grout joint. However, the wedges (Wedge Type) and caps (Twist Type) are fully reusable and can be collected and used on your next job.
How many clips come in a bag, and what size should I order?
Fixplus® spacer clips are available in bags of 100 or 250 pieces. Clips come in joint widths of 1 mm, 1.5 mm, 2 mm, and 3 mm — choose based on your preferred grout joint width. If you’re unsure where to start, the Starter Kits are the easiest way to get the right combination in one go.
What’s the difference between the Wedge Type and Twist Type systems?
The Wedge Type uses clips, wedges, and a plier to lock tiles in place — it suits tile thicknesses from 3 to 15 mm. The Twist Type uses screw clips and a cap with no plier required, and works with tiles 3 to 17 mm thick. Both systems achieve the same result: a perfectly flat, lippage-free tile surface. See the full breakdown on the Tile Leveling System page.
Do I need more clips for large format tiles?
The number of clips per m² is actually lower for larger tiles — but each individual tile requires more clips along its edges to prevent lippage at the centre. For tiles 60×120 cm or larger, make sure you’re placing clips at regular intervals along all four edges, not just at the corners.
Does Fixplus® deliver across Ireland?
Yes — Fixplus® ships nationwide across Ireland from its warehouse in Arklow, Co. Wicklow. Orders placed before 12:00 PM are dispatched the same day via DPD for next-day delivery. Free shipping applies on all orders over €99. For bulk trade orders, contact the team directly at Customer Services.